SPD001 SABFOIL Carbon Paddle

A fixed full pre-preg carbon paddle for incredible lightness and strength.

With its medium-sized blade, this paddle has the right amount of flex to help you increase the frequency and the perfect angle to maximize efficiency and power.

A downwind foiling-specific paddle designed to get you up on the foil faster.

The paddle should be cut and reassembled to your ideal length. Remember that in foil, the distance from the water is greater, you can always shorten it later, and as you progress, you will need a few more centimeters.

Technical Information for Paddle Customization

Handle Cutting: Generally, the total length of the paddle should exceed the rider's height by about 15-25 cm to ensure good performance and fluidity in movement. Start by cutting the handle slightly longer than you think is necessary, and then gradually reduce it to the desired size. This approach helps avoid excessive and irreversible cuts, allowing you to refine the length through subsequent adjustments until the perfect configuration is reached.

Assembly Glue: Use a thick glue or a two-component epoxy glue to ensure a strong and lasting bond between handle and shaft. Check also that the blade is properly fixed to the shaft before use; eventually reinforce following the same gluing procedure.

The materials for cutting and gluing are not provided.

SABFOIL does not assume responsibility for unsuccessful assembly operations.